浙江空压机维修保养厂家我们杭州屹能机电有限公司主要提供无油涡旋空压机、神钢空压机等产品的维修保养业务,业务覆盖浙江杭州、湖州、绍兴、萧山等地,若您有需要,请拨打:0571-87789182
  • 浙江空压机维修服务商上门维修
  • 本站编辑:杭州屹能机电有限公司发布日期:2018-06-19 14:37 浏览次数:

杭州屹能机电有限公司是一家专业从事螺杆式压缩机及真空泵相关产品专业销售服务商,公司位于杭州市江干区笕桥新城广场1203室,地理位置优越,交通便利。公司主要经营螺杆空气压缩机、离心式空气压缩机、真空泵、空调制冷压缩机、注塑机冷水机组、干燥机、储气罐等机械设备等产品的销售及售后服务。杭州屹能机电有限公司本着“客户优先,诚信至上”的原则,热忱期待国内外企业/公司/机构与本单位建立长期的合作关系。诚邀各界朋友前来参观、考察、洽谈业务。欢迎新老客户来电咨询。

空气压缩机特征特点

  由电动机直接驱动压缩机,使曲轴产生旋转运动,带动连杆使活塞产生往复运动,引起气缸容积变化。由于气缸内压力的变化,通过进气阀使空气经过空气滤清器(消声器)进入气缸,在压缩行程中,由于气缸容积的缩小,压缩空气经过排气阀的作用,经排气管,单向阀(止回阀)进入储气罐,当排气压力达到额定压力0.7MPa时由压力开关控制而自动停机。当储气罐压力降至0.5--0.6MPa时压力开关自动联接启动。

  空气压缩机清洗方法

  空压机长期运行会导致设备被水垢堵塞,将会使效率降低、能耗增加、寿命缩短。如果水垢不能被及时地清除,就会面临设备维修、停机或者报废更换的危险。长期以来传统的清洗方式如机械方法(刮、刷)、高压水、化学清洗(酸洗)等在对空压机清洗时出现很多问题:不能彻底清除水垢等沉积物,并对设备造成腐蚀,残留的酸对材质产生二次腐蚀或垢下腐蚀,导致更换设备,此外,清洗废液有毒,需要大量资金进行废水处理。企业可采用高效环保清洗剂避免上述情况,其具有高效、环保、安全、无腐蚀特点,不但清洗效果良好而且对设备没有腐蚀,能够保证空压机的长期使用。

2-1P51Q40437-52.jpg

Characteristics of air compressor

The motor directly drives the compressor to rotate the crankshaft and drive the connecting rod to cause reciprocating motion of the piston, causing the cylinder volume to change. Because of the change in the pressure inside the cylinder, the air passes through the air filter (muffler) through the intake valve to enter the cylinder. In the compression stroke, the compressed air passes through the exhaust valve as the volume of the cylinder is reduced, through the exhaust pipe and the one-way valve (check valve) into the gas storage tank, when the exhaust pressure reaches the rated pressure of 0.7MPa, the pressure is under pressure. Switch control and automatic shutdown. When the pressure of the gas tank drops to 0.5--0.6MPa, the pressure switch is automatically connected and started.

Cleaning method of air compressor

Long term operation of air compressors will cause equipment to be blocked by scale, which will reduce efficiency, increase energy consumption and shorten service life. If scale can not be removed in time, it will be in danger of equipment maintenance, shutdown or abandonment. For a long time, the traditional cleaning methods such as mechanical methods (scraping, brush), high pressure water, chemical cleaning (acid cleaning) have many problems when cleaning the air compressor. They can not completely remove the sediment, and cause corrosion to the equipment. The residual acid has two corrosion or corrosion to the material, which eventually leads to the replacement of the equipment. Cleaning waste liquid is toxic and requires a lot of money for wastewater treatment. The enterprise can use efficient environmental cleaning agent to avoid the above conditions. It has the characteristics of high efficiency, environmental protection, safety and no corrosion. It not only has good cleaning effect but also has no corrosion to the equipment. It can ensure the long-term use of air compressor.